Grey Structure Cost per Sq Ft in Pakistan — June 2026 Updated Rates
Building a house in Pakistan in 2026 requires one critical number before any contractor is hired, any brick is ordered, or any plot is prepared: the grey structure cost per square foot.
Building a house in Pakistan in 2026 requires one critical number before any contractor is hired, any brick is ordered, or any plot is prepared: the grey structure cost per square foot.
Grey structure construction accounts for 55%–65% of the total build budget for any residential or commercial project. Cement prices, steel rates (saria), and skilled labour wages have all shifted over the past twelve months, meaning estimates from 2024 and early 2025 are no longer reliable benchmarks. Builders and homeowners who enter site preparation using outdated figures face budget overruns, material shortfalls, and contract disputes before a single slab is cast.
This guide delivers the actual June 2026 grey structure rates per sq ft across Pakistan, city-by-city breakdowns, plot-size cost tables, a scope checklist, and current construction material prices — so every number in your Bill of Quantities (BOQ) reflects today’s market, not last year’s.
Grey structure construction produces the structural shell of a building before any finishing work begins. Pakistani contractors, CDA authorities, RDA officials, and housing society regulators all define the grey structure stage.
It includes the following completed works:
Grey structure construction explicitly excludes flooring tiles, marble, paint, woodwork, doors and windows, sanitary fittings, kitchen cabinetry, electrical wiring, light fixtures, false ceilings, and all interior finishes. Finishing work begins as a separate phase after the structural shell is complete and handed over.
The grey structure cost per square foot in Pakistan ranges from PKR 2,800 to PKR 3,800 for standard A-category residential construction as of June 2026. The exact rate for any individual project depends on the city, structural specification, soil condition, material grade, and storey count.
| Construction Quality | Rate per Sq Ft (PKR) | Typical Use Case |
|---|---|---|
| Economy (B-category) | 2,200 – 2,600 | Small towns, lower-spec builds |
| Standard A-category | 2,800 – 3,400 | Residential in major cities |
| Premium A+ | 3,400 – 3,800 | DHA, Bahria Town, Gulberg |
| Commercial / Multi-storey | 3,500 – 4,900 | Plazas, offices, apartment blocks |
Rates above cover both materials and labour for the structural scope. Finishing work adds a separate PKR 3,500–8,000+ per sq ft, depending on specification level.
Grey structure construction costs in Pakistan have risen steeply in the final quarter of 2021 and early 2022, tracking steel price volatility, cement inflation, and rupee depreciation:
| Year | Average Cost Range (PKR / Sq Ft) | Key Economic Driver |
|---|---|---|
| 2022 | PKR 1,900 – PKR 2,300 | Post-pandemic supply chain issues and early fuel price hikes. |
| 2023 | PKR 2,200 – PKR 2,500 | Major currency devaluation against the USD; inflation spikes. |
| 2024 | PKR 2,400 – PKR 2,750 | Implementation of higher federal duties on cement and steel. |
| 2025 | PKR 2,600 – PKR 3,100 | Steady increase in local labor costs and electricity tariffs. |
| 2026 (Current) | PKR 2,800 – PKR 3,500 | Market stabilization at a premium baseline. |
Rates showed a partial stabilisation in early 2026 after steep increases during 2023–2025. However, steel and cement prices remain sensitive to global commodity markets, import duties, and local energy costs — meaning rates can shift by 5%–10% within a single quarter.
Construction costs in Pakistan vary significantly by city because labour wages, material transport distances, and housing authority compliance requirements all produce different cost structures.
The grey structure rate per sq ft in Islamabad and Rawalpindi sits between PKR 2,800 and PKR 3,500 for standard A-category residential builds as of June 2026.
Projects inside CDA-regulated sectors, DHA Islamabad, and Bahria Town Rawalpindi typically land at the upper end of this band. CDA and DHA compliance requirements mandate approved cement and steel brands, third-party structural inspection fees, and higher-skilled labour, all of which increase the per-sq-ft cost.
Projects in these premium locations also produce stronger long-term resale values that justify the premium structural expenditure.
The grey structure rate per sq ft in Lahore ranges from PKR 2,650 to PKR 3,500, depending on the housing society. DHA Lahore projects fall between PKR 2,900 and PKR 3,000 per sq ft for standard 10-marla residential designs.
Bahria Town Lahore projects run higher at PKR 3,300 to PKR 3,500 per sq ft. LDA-approved society builds can exceed PKR 3,800 per sq ft when approval compliance fees and longer inspection timelines are factored in.
| City / Region | PKR/sq ft — 2026 |
|---|---|
| Islamabad (CDA / DHA sectors) | 2,800 – 3,500 |
| Rawalpindi (general / Bahria) | 2,800 – 3,300 |
| Lahore (DHA / Bahria Town) | 2,900 – 3,500 |
| Karachi | 2,500 – 3,200 |
| Faisalabad | 2,400 – 2,900 |
| Multan | 2,300 – 2,800 |
| Gujranwala | 2,300 – 2,700 |
Note: Rates represent market ranges for A-category residential construction. Commercial builds, basement projects, and premium material selections can increase rates above these bands.
The estimates grey structure costs by plot size using standard A-category rates of PKR 2,800–3,200 per sq ft for major cities in Pakistan. Covered area values represent typical design-based ranges; actual covered areas depend on the approved architectural drawings (naqsha) for each project.
| Plot Size | Approx. Covered Area | Estimated Grey Structure Cost |
|---|---|---|
| 5 Marla | 1,800 – 2,200 sq ft | PKR 50 Lac – 70 Lac |
| 7 Marla | 2,400 – 2,700 sq ft | PKR 67 Lac – 86 Lac |
| 8 Marla | 2,800 – 3,000 sq ft | PKR 78 Lac – 96 Lac |
| 10 Marla | 3,200 – 3,500 sq ft | PKR 90 Lac – 1.12 Crore |
| 1 Kanal | 5,000 – 6,000 sq ft | PKR 1.4 Crore – 1.92 Crore |
| 2 Kanal | 9,000 – 11,000 sq ft | PKR 2.52 Crore – 3.52 Crore |
Grey Structure Cost = Covered Area (sq ft) × Rate per Sq Ft (PKR)
Example Calculation:
A 10-marla house in DHA Islamabad with 3,400 sq ft covered area at PKR 3,000/sq ft = PKR 10,200,000 (1.02 Crore)
Grey structure cost estimates carry a ±15% variance based on soil conditions, basement requirements, storey count, and final material brand selections.
A project-specific BOQ (Bill of Quantities) produced from approved architectural and structural drawings is the only accurate budgeting tool for any build.
Construction materials represent 60%–70% of total grey structure expenditure. Steel (saria) and cement together account for the largest cost variable between a standard and a premium grey structure build.
| Material | Unit | Current Market Rate (PKR) |
|---|---|---|
| Steel / Saria (Grade 40) | Per kg | 258 – 262 |
| Steel / Saria (Grade 60) | Per kg | 260 – 265 |
| Cement — major brands (50kg bag) | Per bag | 1,400 – 1,600 |
| A-grade bricks | Per 1,000 bricks | 21,000 – 26,000 |
| Margalla crush / coarse aggregate | Per load | Location-dependent |
| Chenab sand (coarse) | Per load | Location-dependent |
Leading brands, including Amreli Steel, Mughal Steel, and Agha Steel, are trading between PKR 258 and PKR 265 per kg as of early June 2026. Grade 60 steel is the specification for columns and roof slabs in seismic zones. Grade 40 steel works for partition walls and secondary structural members.
Major brands — Bestway, DG, Lucky, Askari, and Cherat — are trading between PKR 1,400 and PKR 1,600 per 50kg bag. BOQ contracts must specify approved cement brands because substandard cement is the primary cause of long-term slab cracking and surface seepage failures.
A-grade (awwal eet) bricks should ring with a clear metallic sound when struck together. Low-grade (doem or khangar) bricks absorb water and weaken mortar bonds in load-bearing walls. The standard brick size in Pakistan is 9 × 4.5 × 3 inches; this determines the mortar joint count and material quantity calculations inside the BOQ.
Steel prices in Pakistan can shift by PKR 10–20 per kg within a single month. Contractors and homeowners who purchase steel in bulk — at a locked rate — avoid mid-project cost escalation that derails BOQ budgets.
Grey structure rates rise due to material prices, labour charges, plot location, design complexity, and overall project scale. Understanding these factors helps homeowners estimate costs more accurately:
Larger covered areas produce lower average per-sq-ft costs because fixed mobilisation, machinery, and formwork setup costs spread across more square footage. A 2-kanal build costs less per sq ft than a 5-marla build at the same material grade.
A basement increases excavation depth, requires waterproofed RCC retaining walls, and typically demands a raft or pile foundation instead of standard strip footings. Basement additions push the overall per-sq-ft rate up by 15%–25% compared to a slab-on-grade design.
A weak, sandy, or waterlogged soil profile forces a raft or pile foundation design instead of a cost-efficient strip footing. The soil investigation report produced before design finalisation determines the foundation type and directly controls the foundation cost component inside the BOQ.
DHA, Bahria Town, and CDA projects enforce approved material brand requirements, mandatory third-party structural inspections, and RCC curing timelines that increase cost. These compliance requirements add upfront expense but deliver stronger structural quality and higher long-term resale values.
Upgrading to Margalla crush instead of local bajri, specifying Chenab sand over Ravi sand, and using Grade 60 steel throughout increases the per-sq-ft rate by PKR 300–600 above standard A-category. Premium material selection adds upfront cost and reduces long-term repair, seepage, and settlement expenses by a far greater margin over the building’s lifetime.
A realistic grey structure budget starts with understanding material quantities, labour costs, and market rates. Careful planning helps prevent overspending while maintaining construction quality.
A verbal per-sq-ft quote hides every variable that actually determines cost. A properly prepared BOQ itemises exact quantities of steel, cement, bricks, sand, and crushed stone against current market rates. This states clearly which scope items are included and which are excluded.
Steel prices in Pakistan shift by PKR 10–20 per kg within a single month based on global commodity movements and local mill capacity. Fixing the steel rate at the time of bulk purchase — rather than at the time of billing — protects the project budget from mid-construction price spikes.
The grey structure phase determines the structural health of the building for its entire lifetime. Rebar must be checked for spacing, cover, and lap length before every concrete pour. An unsupervised labour crew will frequently reduce rebar density or shorten cure times to accelerate turnover.
A qualified structural engineer present at the site during every pour is not a premium service — it is the minimum standard for A-category quality.
Grey structure construction in Islamabad and Rawalpindi typically ranges from PKR 2,800–3,800 per sq ft in 2026, depending on materials, design, and location. To avoid cost overruns, always work with a detailed BOQ, approved material specifications, and professional site supervision.
DBL offers free site assessments, BOQ-based quotations, and dedicated engineer supervision for grey structure projects in Islamabad, Rawalpindi, DHA, and Bahria Town.
Ready for an accurate cost estimate?
Request a Free BOQ Consultation from DBL today.
A 10-marla grey structure in Islamabad with approximately 3,200–3,500 sq ft of covered area costs between PKR 90 Lac and PKR 1.12 Crore using standard A-category materials and June 2026 labour rates. DHA Islamabad projects with premium structural specifications may exceed this estimate.
Grey structure construction only includes concealed plumbing supply and drainage rough-in lines, and embedded electrical conduits inside walls and slabs. No plumbing fixtures and electrical wiring.
A 10-marla grey structure in Islamabad or Rawalpindi typically requires 4 to 6 months, accounting for RCC foundation curing periods, slab curing intervals between storeys, and weather interruptions during the monsoon season.
Share your plot size, city, and housing society location, number of storeys, basement requirement, and approved architectural drawings with us. We provide you with a BOQ-based quotation tied to current rates.
